Three-phase input, 340VAC~420VAC, frequency 47HZ~63HZ
The output voltage
0-rated (maximum rating 1000V, menu setting, digital or encoder knob input)
0-rated (maximum rating 10000A, menu setting, digital or encoder knob input)
0-rated value (maximum rating 500KW menu setting, digital or encoder knob input)
Voltage ripple p-p
Voltage ripple rms
Linear adjustment rate
Voltage: 0.01% F.S.; Current: 0.05% F.S.
Loading adjustment rate
Voltage: 0.02% F.S.; Current: 0.1% F.S.
Voltage control / current control; programming voltage support: DC0-5V / DC0-10V input
Voltage measurement accuracy
Current measurement accuracy
Voltage and current monitoring
voltage / current monitoring output voltage: DC0-10V
Typical value is 1mS, load changes by 50%, and the voltage is restored to 0.75% of the set value.
4.3-inch TFT color LCD display, support for Simplified Chinese, Traditional Chinese and English display
RS232 (standard), LAN (standard), GPIB (optional)
20 groups of quick call parameters + 8 sequence files
FTG combined super power programmable DC power supply (15KW):
FTG combined super power programmable DC power supply (30KW):
FTG combined super power programmable DC power supply (105KW):
Power range: 5~500KW;
lVoltage range: 20V, 30V, 50V, 60V, 100V, 160V, 300V, 400V, 500V, 600V, 800V, 1000V, 1200V, 1500V;
l High precision voltage and current control and measurement;
lOvervoltage/overcurrent/overpower/overtemperature all-round intelligent protection function;
l Convenient and practical sequence function, which can realize various voltage and current waveform output;
l Constant voltage, constant current, constant power output function;
l Analog programming function supports 0-5V, 0-10V, 4mA~20mA programming input,
l control voltage, current and power;
l With voltage remote compensation and protection;
l Support voltage and current monitoring output;
l Intelligent fan control to reduce noise and improve fan life;
l Rich digital I/O port;
lTFT color LCD display, support for Simplified Chinese, Traditional Chinese and English display;
lProvide RS232, LAN, GPIB (optional) multiple remote communication interfaces for you
Standard SCPI directives facilitate the establishment of intelligent test platforms and secondary development;
Module stacking and standard rack design for easy installation and maintenance.
The FTG series has a built-in 16bits high-precision A/D converter with a measurement accuracy of 0.1%+0.1%F.S., current 0.1%+0.2%F.S. The measured values of voltage, current and power can be displayed on the display of the front panel of the power supply. In addition, the FTG additionally provides voltage and current monitoring output functions. The user can monitor the output waveform of the voltage and current through the oscilloscope through the monitoring output terminal
The FTG power supply has two modes: constant voltage output and constant current output. The user can set the output voltage and output current. When the power supply is working, it is first output in constant voltage mode; when the load sink current exceeds the output current set value, the power supply automatically switches to constant current mode.
The FTG provides an output mode indication IO through which the user can obtain the current output mode of the power supply.。
The FTG series power supply has a sequence file function. Users can edit complex voltage and current waveforms according to actual needs. It is ideal for aircraft equipment testing, in-vehicle equipment testing and other equipment testing that will generate voltage interruptions.
Constant power function
The FTG series power supply has a constant power output function that allows the user to set the power output value, the highest output voltage and the highest output current. After the constant power output is turned on, the power supply continuously adjusts the output voltage and the output current so that the output power is maintained at the set value. Users can also adjust the response speed to accommodate various types of loads at different rates.
The FTG series has two analog input ports for voltage programming and current programming to control the output voltage and output current separately. The analog programming signal can select 0~5V or 0~10V DC voltage signal. The programming signal corresponds to the output voltage and output current from 0 to full scale.
The FTG series power supply is designed with an output energy absorbing circuit. This circuit does not work when the power supply is operating normally, and the voltage on the output capacitor is quickly absorbed when the output is turned off. On the one hand, the safety hazard can be eliminated to meet the safety requirements, and on the other hand, the motor user can suppress the brake reverse voltage to protect the motor circuit and the power supply.
|Options & Accessories||Instruction||Images|
|FTL series programmable DC power supply||FTL is a high performance, versatile, medium and small power, series programmable DC power supply. The product is stable and mature, and has comprehensive protection functions such as overload, polari...|
|FTP series wide range programmable DC power supply||The FTP series wide-range programmable DC power supply is a high-performance DC power supply developed by Faith Technology. It has a wide range of output, high power, high current, low ripple noise, f...|
|FTH High Power Programmable DC Power Supply||Single power supply voltage 0~1500V, current 0~750A. FTH series program-controlled DC power supply is a high-power DC switching power supply with high power, high current, low ripple noise, fast trans...|
|FTG combined super power programmable DC power supply||FTG DC switching power supply is the result of many years of continuous research and development in the field of power electronics. FTG power supply has the advantages of high power and high curre...|
FTG DC switching power supply is the result of many years of continuous research and development in the field of power electronics. FTG power supply has the advantages of high power and high current, low ripple noise, fast transient response, high resolution and high precision. Can be used in laboratory testing, automotive equipment testing, solar inverter testing, DC / DC converter and inverter testing, engine start testing, battery automatic charging, electronic product life cycle testing. The FTG series power supply is the representative of the highest level of power supply available today, with high load response speed and very low ripple noise. The unique circuit design and thermal design make this power supply have a very high power density, and the 3U height can support 15KW. The FTG series power supply adopts a modular stacking architecture, and the modules are connected by a high-speed external bus. Therefore, the power supply has the structural advantages of being easy to maintain, easy to expand, and highly reliable. Editing the sequence file enables the power supply to output complex voltage and current waveforms. Users can edit files according to their needs or with reference to various test standards. Digital and analog programming capabilities make power applications more widely available. The FTG power supply with color TFT LCD display and dual knobs has a friendly man-machine interface, and its rich display content and convenient call operation provide users with great convenience. Users can remotely operate the power supply via LAN, RS232 or GPIB communication interfaces. The FTG series power supply has a built-in power-on diagnostic program that reduces machine failure rates. Protection functions such as overvoltage, overcurrent, overpower, and overtemperature can greatly improve equipment reliability. Intelligent fan control not only reduces noise, saves energy, but also improves power supply stability.
Single power supply voltage 0~1500V, current 0~750A. FTH series program-controlled DC power supply is a high-power DC switching power supply with high power, high current, low ripple noise, fast transient response, high resolution and high precision. Can be used in laboratory testing, automotive equipment testing, solar inverter testing, DC / DC converter and inverter testing, engine start testing, battery automatic charging, electronic product life cycle testing and more. The FTH Series Programmable DC Power Supply offers many unique features for power supply, system integration, industrial, battery charging and analog, electric vehicles and electric motors. 3U/15KW high power density, accurate output current and voltage measurement, output trigger signal. A complex DC transient waveform can be simulated to test the device's ability to trip, drop, and other voltages. The FIS series of program-controlled DC power supplies, including 15 different models, range from 5 kW to 15 kW, with current ranges up to 250 A and voltage ranges up to 600 V. FTH series program-controlled DC power supply can easily connect 5 instruments in parallel, and the power is cascaded to 75KW for high-power applications.
FTL is a high performance, versatile, medium and small power, series programmable DC power supply. The product is stable and mature, and has comprehensive protection functions such as overload, polarity reversal, overvoltage, overcurrent, over temperature, etc., which can keep the power and load in the unstable environment. With an adjustment ratio of less than 0.01% and chopping and noise of less than 1mVrms, FTL automatically selects internal continuous or dynamic loads for applications such as current surges. The FTL series is suitable for both high-index laboratory use and high-performance test systems.
The FTP series wide-range programmable DC power supply is a high-performance DC power supply developed by Faith Technology. It has a wide range of output, high power, high current, low ripple noise, fast transient response, high resolution, high precision, and voltage and current slope. Settings and other advantages. FTP series wide range programmable DC power supply is ATE system integration, laboratory test, vehicle equipment test, solar inverter test, DC/DC converter test, automotive electronics, engine start test, superconductivity test, motor test, battery charge simulation The best choice for applications such as voltage/current sensor calibration, laser testing and power supply, and electronics lifecycle testing.